[PATCH] tty: serial: atmel: use macros instead of hardcoded values
From: Claudiu Beznea <hidden>
Date: 2021-10-07 11:20:24
Also in:
linux-serial, lkml
Subsystem:
microchip at91 serial driver, the rest, tty layer and serial drivers · Maintainers:
Richard Genoud, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Use UART_PM_STATE_ON, UART_PM_STATE_OFF instead of hardcoded values. Signed-off-by: Claudiu Beznea <redacted> --- drivers/tty/serial/atmel_serial.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 249ea35088d2..2c99a47a2535 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c@@ -2084,7 +2084,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); switch (state) { - case 0: + case UART_PM_STATE_ON: /* * Enable the peripheral clock for this serial port. * This is called on uart_open() or a resume event.
@@ -2094,7 +2094,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, /* re-enable interrupts if we disabled some on suspend */ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->backup_imr); break; - case 3: + case UART_PM_STATE_OFF: /* Back up the interrupt mask and disable all interrupts */ atmel_port->backup_imr = atmel_uart_readl(port, ATMEL_US_IMR); atmel_uart_writel(port, ATMEL_US_IDR, -1);
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel