[PATCH v2 3/7] arm64: dts: imx8mq-librem5: wire up the wifi regulator
From: Martin Kepplinger <hidden>
Date: 2021-10-05 13:50:04
Also in:
linux-devicetree, lkml, phone-devel
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Guido Günther <agx@sigxcpu.org> Connect the wifi power regulator to the corresponding GPIO. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Martin Kepplinger <redacted> --- arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 95bbaa108805..9a309b1d0a90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi@@ -138,9 +138,14 @@ reg_vsys_3v4: regulator-vsys-3v4 { reg_wifi_3v3: regulator-wifi-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr>; regulator-name = "3V3_WIFI"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd_3v3>; }; sound {
@@ -638,6 +643,13 @@ MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1 >; }; + pinctrl_wifi_pwr: wifipwrgrp { + fsl,pins = < + /* WIFI3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < /* nWDOG */
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel