On Wed, 15 Sept 2021 at 19:37, Chanwoo Choi [off-list ref] wrote:

Hi,

You don't add clock ids for the all defined clocks in clk-exynos850.c.
I recommend that add all clock ids for the defined clocks if possible.

If you want to change the parent clock of mux or change the clock rate
of div rate for some clocks, you have to touch the files as following:
- include/dt-bindings/clock/exynos850.h
- drivers/clk/samsung/clk-exynos850.c
- exynos850 dt files

If you define the clock ids for all clocks added to this patchset,
you can change the parent or rate by just editing the dt files.

Hi Chanwoo,

I see your point. But I have intentionally omitted some clock ids,
which can't be / shouldn't be used by consumers in device tree.
Actually I took that idea from clk-exynos7.c.

Krzysztof, Sylwester: can you please advice if all clock ids should be
defined, or only those that are going to be used in dts clk consumers?
I don't mind reworking the patch, just want to be sure which design
approach we want to follow.

Thanks!

But, I have no strongly objection about just keeping this patch.


On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:

quoted

Clock controller driver is designed to have separate instances for each
particular CMU. So clock IDs in this bindings header also start from 1
for each CMU.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
  include/dt-bindings/clock/exynos850.h | 72 +++++++++++++++++++++++++++
  1 file changed, 72 insertions(+)
  create mode 100644 include/dt-bindings/clock/exynos850.h

diff --git a/include/dt-bindings/clock/exynos850.h b/include/dt-bindings/clock/exynos850.h
new file mode 100644
index 000000000000..2f0a7f619627
--- /dev/null
+++ b/include/dt-bindings/clock/exynos850.h

@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Device Tree binding constants for Exynos850 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_850_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_850_H
+
+/* CMU_TOP */
+#define DOUT_HSI_BUS                 1
+#define DOUT_HSI_MMC_CARD            2
+#define DOUT_HSI_USB20DRD            3
+#define DOUT_PERI_BUS                        4
+#define DOUT_PERI_UART                       5
+#define DOUT_PERI_IP                 6
+#define DOUT_CORE_BUS                        7
+#define DOUT_CORE_CCI                        8
+#define DOUT_CORE_MMC_EMBD           9
+#define DOUT_CORE_SSS                        10
+#define TOP_NR_CLK                   11
+
+/* CMU_HSI */
+#define GOUT_USB_RTC_CLK             1
+#define GOUT_USB_REF_CLK             2
+#define GOUT_USB_PHY_REF_CLK         3
+#define GOUT_USB_PHY_ACLK            4
+#define GOUT_USB_BUS_EARLY_CLK               5
+#define GOUT_GPIO_HSI_PCLK           6
+#define GOUT_MMC_CARD_ACLK           7
+#define GOUT_MMC_CARD_SDCLKIN                8
+#define GOUT_SYSREG_HSI_PCLK         9
+#define HSI_NR_CLK                   10
+
+/* CMU_PERI */
+#define GOUT_GPIO_PERI_PCLK          1
+#define GOUT_HSI2C0_IPCLK            2
+#define GOUT_HSI2C0_PCLK             3
+#define GOUT_HSI2C1_IPCLK            4
+#define GOUT_HSI2C1_PCLK             5
+#define GOUT_HSI2C2_IPCLK            6
+#define GOUT_HSI2C2_PCLK             7
+#define GOUT_I2C0_PCLK                       8
+#define GOUT_I2C1_PCLK                       9
+#define GOUT_I2C2_PCLK                       10
+#define GOUT_I2C3_PCLK                       11
+#define GOUT_I2C4_PCLK                       12
+#define GOUT_I2C5_PCLK                       13
+#define GOUT_I2C6_PCLK                       14
+#define GOUT_MCT_PCLK                        15
+#define GOUT_PWM_MOTOR_PCLK          16
+#define GOUT_SPI0_IPCLK                      17
+#define GOUT_SPI0_PCLK                       18
+#define GOUT_SYSREG_PERI_PCLK                19
+#define GOUT_UART_IPCLK                      20
+#define GOUT_UART_PCLK                       21
+#define GOUT_WDT0_PCLK                       22
+#define GOUT_WDT1_PCLK                       23
+#define PERI_NR_CLK                  24
+
+/* CMU_CORE */
+#define GOUT_CCI_ACLK                        1
+#define GOUT_GIC_CLK                 2
+#define GOUT_MMC_EMBD_ACLK           3
+#define GOUT_MMC_EMBD_SDCLKIN                4
+#define GOUT_SSS_ACLK                        5
+#define GOUT_SSS_PCLK                        6
+#define CORE_NR_CLK                  7
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_850_H */

--
Best Regards,
Samsung Electronics
Chanwoo Choi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel