[PATCH] i2c: rk3x: enable clock before getting rate
From: John Keeping <hidden>
Date: 2021-10-04 13:47:49
Also in:
linux-i2c, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, i2c subsystem, i2c subsystem host drivers, the rest · Maintainers:
Heiko Stuebner, Andi Shyti, Linus Torvalds
clk_get_rate() is documented as requiring the clock to be enabled. Ensure that the bus clock is enabled before calling clk_get_rate() in rk3x_i2c_probe() to satisfy this requirement. Signed-off-by: John Keeping <redacted> --- drivers/i2c/busses/i2c-rk3x.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 819ab4ee517e..332755fab2a1 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c@@ -1338,8 +1338,15 @@ static int rk3x_i2c_probe(struct platform_device *pdev) goto err_pclk; } + ret = clk_enable(i2c->clk); + if (ret < 0) { + dev_err(&pdev->dev, "Can't enable bus clk: %d\n", ret); + goto err_clk_notifier; + } + clk_rate = clk_get_rate(i2c->clk); rk3x_i2c_adapt_div(i2c, clk_rate); + clk_disable(i2c->clk); ret = i2c_add_adapter(&i2c->adap); if (ret < 0)
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel