[PATCH v4 03/18] soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain
From: Lucas Stach <l.stach@pengutronix.de>
Date: 2021-09-10 20:26:55
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Marek Vasut <marex@denx.de> To bring up the MX8MM GPU domain, it is necessary to configure both GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers. Without this configuration, the system might hang on boot when bringing up the GPU power domain. This is sporadically observed on multiple disparate systems. Add the GPU3D bit into MX8MM GPU domain pgc bitfield, so that both GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers are configured when bringing up the GPU domain. This fixes the sporadic hang. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> --- drivers/soc/imx/gpcv2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index c7826ce92f0d..2c43e74db0be 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c@@ -679,7 +679,7 @@ static const struct imx_pgc_domain imx8mm_pgc_domains[] = { .hskreq = IMX8MM_GPU_HSK_PWRDNREQN, .hskack = IMX8MM_GPU_HSK_PWRDNACKN, }, - .pgc = BIT(IMX8MM_PGC_GPU2D), + .pgc = BIT(IMX8MM_PGC_GPU2D) | BIT(IMX8MM_PGC_GPU3D), }, [IMX8MM_POWER_DOMAIN_VPUMIX] = {
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel