[PATCH v2 30/52] dt-bindings: mmc: Convert MMC Card binding to a schema

@@ -1,30 +0,0 @@
-mmc-card / eMMC bindings
-------------------------
-
-This documents describes the devicetree bindings for a mmc-host controller
-child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
-in mmc.txt
-
-Required properties:
--compatible : Must be "mmc-card"
--reg        : Must be <0>
-
-Optional properties:
--broken-hpi : Use this to indicate that the mmc-card has a broken hpi
-              implementation, and that hpi should not be used
-
-Example:
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-
-	mmccard: mmccard@0 {
-		reg = <0>;
-		compatible = "mmc-card";
-		broken-hpi;
-	};
-};

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Card / eMMC Generic Device Tree Bindings
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+  This documents describes the devicetree bindings for a mmc-host controller
+  child node describing a mmc-card / an eMMC.
+
+properties:
+  compatible:
+    const: mmc-card
+
+  reg:
+    const: 0
+
+  broken-hpi:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Use this to indicate that the mmc-card has a broken hpi
+      implementation, and that hpi should not be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        card@0 {
+            compatible = "mmc-card";
+            reg = <0>;
+            broken-hpi;
+        };
+    };
+
+...

@@ -333,12 +333,6 @@ patternProperties:
               subnode describes. A value of 0 denotes the memory SD
               function, values from 1 to 7 denote the SDIO functions.
 
-      broken-hpi:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          Use this to indicate that the mmc-card has a broken hpi
-          implementation, and that hpi should not be used.
-
     required:
       - reg