[PATCH 7/8] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
flat view
STALE1828d
From: Frieder Schrempf <hidden>
Date: 2021-09-30 15:57:27
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Frieder Schrempf <redacted> According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns and a delay of 15 ms after the reset has been deasserted. Set the matching values in the devicetree. Reported-by: Heiko Thiery <redacted> Signed-off-by: Frieder Schrempf <redacted> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index 0e4509287a92..106e13945ae5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts@@ -124,8 +124,8 @@ mdio { ethphy: ethernet-phy@0 { reg = <0>; - reset-assert-us = <100>; - reset-deassert-us = <100>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; }; };
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel