[PATCH v3 14/33] iommu/mediatek: Always enable output PA over 32bits in isr
From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-09-23 12:01:41
Also in:
linux-devicetree, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
Currently the output PA[32:33] is contained by the flag IOVA_34. This is not right. the iova_34 has no relation with pa[32:33], the 32bits iova still could map to pa[32:33]. Move it out from the flag. No need fix tag since currently only mt8192 use the calulation and it always has this IOVA_34 flag. Prepare for the IOMMU that still use IOVA 32bits but its dram size may be over 4GB. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/iommu/mtk_iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4a33b6c6b1db..ef98f19ce86e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -289,11 +289,11 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) { va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova); - pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK; fault_iova |= (u64)va34_32 << 32; - fault_pa |= (u64)pa34_32 << 32; } + pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova); + fault_pa |= (u64)pa34_32 << 32; fault_port = F_MMU_INT_ID_PORT_ID(regval); if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel