[PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode

From: Bastien Roucariès <redacted>

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.

Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.

Signed-off-by: Bastien Roucariès <redacted>
---
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 8077f1716fbc..ecb91fb899ff 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -112,7 +112,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

-- 
2.33.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hi,

On Thu, Sep 16, 2021 at 08:17:21AM +0000, roucaries.bastien@gmail.com wrote:

From: Bastien Roucariès <redacted>

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.

Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
the Ethernet working again on this board.

Signed-off-by: Bastien Roucariès <redacted>

It's the third time you've sent it since yesterday, what are the
differences and which one am I supposed to apply?

Maxime

On Thu, 16 Sep 2021 08:17:21 +0000, roucaries.bastien@gmail.com wrote:

From: Bastien Roucariès <redacted>

Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
config") sets the RX/TX delay according to the phy-mode property in the
device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the
wrong setting.

[...]

Applied, thanks!

[1/1] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
      commit: 55dd7e059098ce4bd0a55c251cb78e74604abb57

Best regards,
-- 
Maxime Ripard [off-list ref]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel