[PATCH 4/8] dt-bindings: clock: arm, syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address
From: Rob Herring <robh@kernel.org>
Date: 2021-09-09 21:31:40
Also in:
linux-clk, linux-devicetree, linux-leds, lkml
Subsystem:
arm integrator, versatile and realview support, common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
'reg' is the standard property for defining register banks/addresses. Add it to use for the VCO register address and deprecate 'vco-offset'. This will also allow for using standard node names with unit-addresses. Cc: Linus Walleij <redacted> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index 118c5543e037..c346287ca15d 100644
--- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml@@ -69,6 +69,10 @@ properties: - arm,impd1-vco1 - arm,impd1-vco2 + reg: + maxItems: 1 + description: The VCO register + clocks: description: Parent clock for the ICST VCO maxItems: 1
@@ -83,6 +87,7 @@ properties: vco-offset: $ref: '/schemas/types.yaml#/definitions/uint32' description: Offset to the VCO register for the oscillator + deprecated required: - "#clock-cells"
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel