Re: [PATCH v2 1/4] arm64: dts: ti: k3-am65: Flip mmc device ordering
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: 2021-09-08 06:06:20
Also in:
linux-devicetree, lkml
On 08.09.21 07:48, Nishanth Menon wrote:
On 07:25-20210908, Jan Kiszka wrote:quoted
On 08.09.21 04:44, Nishanth Menon wrote:quoted
On 18:37-20210907, Jan Kiszka wrote:quoted
From: Jan Kiszka <jan.kiszka@siemens.com> This ensures that the SD card will remain mmc0 across devices with and without eMMC. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> --- arch/arm64/boot/dts/ti/k3-am65.dtsi | 2 ++ 1 file changed, 2 insertions(+)diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index a9fc1af03f27..785d931a2dd9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi@@ -31,6 +31,8 @@ aliases { i2c4 = &main_i2c2; i2c5 = &main_i2c3; ethernet0 = &cpsw_port1; + mmc0 = &sdhci1; + mmc1 = &sdhci0;Jan, Responding in context of [1]. Suggestion from Aswath is to do the following instead at SoC level: + mmc0 = &sdhci0; + mmc1 = &sdhci1;Then I will leave this up to you and will go back to v1 of this patch (as we require it the other way around).Could you elaborate on the rationale as to why the other way around? That would probably provide the reasoning to override the SoC generic definitions in the board dts/dtsi as the exception case.
As I wrote in v1: We have deployed devices that use mmcblk0 == SD card in the field. Those should now be migrated to upstream kernel/DT, but ideally without glitches in the interface. Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel