[PATCH v2 2/3] arm64: dts: hisilicon: Add usb mux hub for hikey970
flat view
STALE1864d
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Date: 2021-09-01 12:23:49
Also in:
linux-devicetree, lkml
Subsystem:
arm/hisilicon soc support, the rest · Maintainers:
Wei Xu, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v2 current
- v3 [diff vs current]
- v4 [diff vs current]
Add dt bindings for Kirin 970 USB HUB. Such board comes with an integrated USB HUB provided via a TI TUSB8041 4-port USB 3.0 hub. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../boot/dts/hisilicon/hi3670-hikey970.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 60594db07041..8502814d33e7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts@@ -53,6 +53,30 @@ wlan_en: wlan-en-1-8v { startup-delay-us = <70000>; enable-active-high; }; + + hikey_usbhub: hikey_usbhub { + compatible = "hisilicon,kirin970_hikey_usbhub"; + + typec-vbus-gpios = <&gpio26 1 0>; + otg-switch-gpios = <&gpio4 2 0>; + hub-reset-en-gpios = <&gpio0 3 0>; + hub-vdd-supply = <&ldo17>; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + + hikey_usb_ep0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + hikey_usb_ep1: endpoint@1 { + reg = <1>; + remote-endpoint = <&rt1711h_ep>; + }; + }; + }; }; /*
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel