Re: [PATCH] kbuild: Enable dtc 'pci_device_reg' warning by default
From: nicolas saenz julienne <nsaenz@kernel.org>
Date: 2021-08-30 10:47:09
On Fri, 2021-08-20 at 11:50 -0500, Rob Herring wrote:
There's only a couple of instances of the 'pci_device_reg' warnings left and they look legit, so let's enable the warning by default. Cc: Heiko Stuebner <heiko@sntech.de> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: soc@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- These are the 2 remaining warnings: arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi:464.3-52: Warning (pci_device_reg): /pcie@f8000000/pcie@0,0:reg: PCI reg address is not configuration space arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0"
Just for the record, bcm2771 issue is being fixed here: https://lkml.org/lkml/2021/8/30/232 Regards, Nicolas _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel