On 8/7/2021 1:06 PM, Stefan Wahren wrote:

This series add support for the Raspberry Pi Compute Module 4 and its
IO board.

Changes in V2:
- drop emmc2bus patch as it affects userspace (thanks to Marc Zyngier)
- tested with CM4 and integrate sdhci patches from Nicolas (just include kHz fixups)
- add Rob's Acked-by
- add HS200 property to emmc2 node for a slight performance gain
- move antenna comment to the proper position

Nicolas, I am assuming you will be picking up these patches and submit a 
BCM283x pull request with them. Thanks!

Nicolas Saenz Julienne (2):
   mmc: sdhci-iproc: Cap min clock frequency on BCM2711
   mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711

Stefan Wahren (8):
   ARM: dts: bcm2711: fix MDIO #address- and #size-cells
   ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
   dt-bindings: display: bcm2835: add optional property power-domains
   ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
   dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
   ARM: dts: Add Raspberry Pi Compute Module 4
   ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
   arm64: dts: broadcom: Add reference to RPi CM4 IO Board

  .../devicetree/bindings/arm/bcm/bcm2835.yaml       |   1 +
  .../bindings/display/brcm,bcm2835-dsi0.yaml        |   3 +
  .../bindings/display/brcm,bcm2835-hdmi.yaml        |   3 +
  .../bindings/display/brcm,bcm2835-v3d.yaml         |   3 +
  .../bindings/display/brcm,bcm2835-vec.yaml         |   3 +
  arch/arm/boot/dts/Makefile                         |   1 +
  arch/arm/boot/dts/bcm2711-rpi-4-b.dts              |  42 ++-----
  arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts           | 138 +++++++++++++++++++++
  arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi             | 113 +++++++++++++++++
  arch/arm/boot/dts/bcm2711.dtsi                     |   4 +-
  arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           |  31 ++---
  arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts         |  36 ++----
  arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts         |  36 ++----
  arch/arm/boot/dts/bcm2837-rpi-3-b.dts              |  36 ++----
  arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi         |  34 +++++
  arch/arm64/boot/dts/broadcom/Makefile              |   1 +
  .../arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts |   2 +
  drivers/mmc/host/sdhci-iproc.c                     |  21 +++-
  18 files changed, 366 insertions(+), 142 deletions(-)
  create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
  create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
  create mode 100644 arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
  create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts

-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel