[PATCH v2 3/6] dt-bindings: mmc: fsl-imx-esdhc: add fsl, broken-auto-tuning binding
From: haibo.chen@nxp.com
Date: 2021-08-18 11:38:48
Also in:
linux-devicetree, linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Haibo Chen <haibo.chen@nxp.com> Add a new fsl,broken-auto-tuning binding for sdio devices. When sdio device support sdio interrupt, need to use this property to disable auto-tuning. Auto-tuning circuit is conflict with sdio interrupt. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index b5baf439fbac..d7c8e5880473 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml@@ -93,6 +93,15 @@ properties: tuning step can't find the proper delay window within limited tuning retries. default: 0 + fsl,broken-auto-tuning: + description: | + Recommend for SDIO cards that enables SDIO interrupt for SDR104 and SDR50 mode. + SDIO interrupt uses DAT[1] to signal the card's interrupt. Auto-tuning circuit + will detect this interrupt on DAT[1] when in 4Bit bus mode, and take it just + as normal data, wrongly adjust the delay cell. This property is used to disable + the auto-tuning function. + type: boolean + fsl,strobe-dll-delay-target: $ref: /schemas/types.yaml#/definitions/uint32 description: |
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel