Thread (31 messages) flat view 31 messages, 2 authors, 2021-08-17
STALE1828d REVIEWED: 21 (21M)

1 review trailer.

[PATCH v2 28/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3Ne

From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2021-08-12 11:24:31
Also in: linux-devicetree, linux-renesas-soc
Subsystem: arm/risc-v/renesas architecture, the rest · Maintainers: Geert Uytterhoeven, Magnus Damm, Linus Torvalds

Add support for the Renesas R-Car Starter Kit Premier and Kingfisher
combo equipped with an R-Car H3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m8-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index c7d2b91a833b00b8..498f1c4a3b271b93 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -93,5 +93,6 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a779m7-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
new file mode 100644
index 0000000000000000..3a2c80fb1a3d271f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m8-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m8";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m8", "renesas,r8a7795";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help