Thread (6 messages) flat view 6 messages, 4 authors, 2021-09-06

Re: Enable HSIC Host Port on Atmel/Microchip SAMA5D2

From: Alan Stern <stern@rowland.harvard.edu>
Date: 2021-08-23 14:00:55
Also in: linux-usb, lkml

On Mon, Aug 23, 2021 at 11:24:35AM +0200, Alexander Dahl wrote:
Hello,

for a new embedded board featuring a Microchip SAMA5D2 SoC (64 MiB SiP variant 
SAMA5D27C-D5M) we connected the third USB host port (HSIC only) with an 
USB3503 hub chip. This doesn't work out of the box with the Linux kernel 
currently, because neither the SoC nor the kernel does enable the HSIC 
interface by default.

That SoC has three USB host ports, from the SAMA5D2 Series Datasheet [1] I 
learned there's a flag in an EHCI register, which has to be set to enable the 
HSIC interface on port C, the third port. (Section "41.7.14 EHCI: REG08 - HSIC 
Enable/Disable" of the datasheet.) I suppose that register is vendor specific. 
The register definitions in '/include/linux/usb/ehci_def.h' do not contain 
that register.

Where would I add that register definition and set that flag in the kernel 
then?  I suppose in the vendor specific ehci driver?  
That would be 'drivers/usb/host/ehci-atmel.c' right?
That is where you would set the flag.  You might want to put the 
register definition in ehci_def.h, with the other definitions.
Since that feature is optional (other boards don't need to turn on hsic on 
that port), some driver specific new device tree binding would be necessary, 
right?  I suppose that would have to be documented in 'Documentation/
devicetree/bindings/usb/atmel-usb.txt' right? (Or that would have to be 
converted to yaml first?)
Yes, it would have to go into the device tree data somehow.  I don't 
know the best way to do this; people who know more about DT may be able 
to tell you.
Is this the right track?  If yes, I'm going to develop patches for this. 
Otherwise any hint into the right direction are highly appreciated.
Yes, this is the right approach.

Alan Stern
FWIW, I'm not the first one struggling [2] with this problem. ;-)

Greets
Alex

[1] https://www.microchip.com/en-us/product/ATSAMA5D27C-D5M#document-table
[2] https://community.atmel.com/forum/sama5d2-using-hsic-under-linux
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help