Re: [PATCH v8 02/11] dt-bindings: rtc: sun6i: Add H616 compatible string
From: Samuel Holland <samuel@sholland.org>
Date: 2021-08-20 03:57:25
Also in:
linux-devicetree, linux-rtc, linux-sunxi, lkml
On 8/18/21 4:04 AM, Andre Przywara wrote:
On Tue, 17 Aug 2021 09:38:10 +0200 Maxime Ripard [off-list ref] wrote: Hi Maxime,quoted
On Mon, Aug 02, 2021 at 01:39:38AM +0100, Andre Przywara wrote:quoted
On Mon, 26 Jul 2021 16:41:37 +0200 Maxime Ripard [off-list ref] wrote:quoted
Hi, On Fri, Jul 23, 2021 at 04:38:29PM +0100, Andre Przywara wrote:quoted
Add the obvious compatible name to the existing RTC binding. The actual RTC part of the device uses a different day/month/year storage scheme, so it's not compatible with the previous devices. Also the clock part is quite different, as there is no external 32K LOSC oscillator input. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index beeb90e55727..d8a6500e5840 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml@@ -26,6 +26,7 @@ properties: - const: allwinner,sun50i-a64-rtc - const: allwinner,sun8i-h3-rtc - const: allwinner,sun50i-h6-rtc + - const: allwinner,sun50i-h616-rtc reg: maxItems: 1@@ -104,6 +105,19 @@ allOf: minItems: 3 maxItems: 3 + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h616-rtc + + then: + properties: + clock-output-names: + minItems: 3 + maxItems: 3You don't need both of them when they are equalquoted
+ clocks: false +It's not entirely clear to me what those clocks are about though. If we look at the clock output in the user manual, it looks like there's only two clocks that are actually being output: the 32k "fanout" clock and the losc. What are the 3 you're talking about?]I see three: the raw SYSTEM "CLK32K_LOSC", the RTC input + debounce clock (/32), and the multiplexed PAD.But the input and debounce clock is only for the RTC itself right? So it should be local to the driver and doesn't need to be made available to the other driversI understood "debounce" as being the clock used for the pinctrl debouncer. What would it debounce otherwise? Do you think that this "debounce circuit" is something internal to the RTC and is totally irrelevant for us?
I'm pretty sure this is the debounce for the NMI and the SoC reset signal, not the pinctrl. The pinctrl debounce clock pretty clearly references 32 kHz.
But in general I looked at how many *different* clocks this diagram
describes, and I count: one unaltered ("SYSTEM"), one "div by
32" (RTC/debounce), and one multiplexed. My aim was to avoid
DT binding changes when we later discover we do need one of them for
something (as happened in the past). So three seemed to be the safe
choice here, to avoid surprises. In the worst case we just will never
reference one of them.Plus RC16M/IOSC (and depending on how you look at it, DCXO24M/HOSC).
quoted
Either way, what this list is must be documented.You mean to overwrite the "description" stanza for clock-output-names? And can this be done in the per-SoC parts in the later part of the binding, keeping the existing description? Cheers, Andrequoted
quoted
quoted
Also, it looks like the 32k fanout clock needs at least the hosc or pll-periph in input, so we probably don't want to ask for no parent clock?
Do you suggest we fix this for the existing bindings?
quoted
quoted
Well, we never seem to reference the HOSC this way, this was always somewhat explicit. And yes, there is PLL-PERIPH as an input, but we don't support this yet. So I went with 0 input clocks *for now*: the driver can then ignore all clocks, so any clock referenced in the DT later won't cause any harm. This will all be addressed by Samuel's RTC clock patch, which will also touch the H6, IIRC. And it looks like we will need to touch the binding anyway then, but can then just *extend* this.You mentioned that series several times already and never provided an explanation for what it was supposed to be doing except fixing everything. What's the general plan for that series?
This is my fault for not sending anything yet. Since the initial version of the driver had the RTC providing HOSC, it depended on converting the existing A100, H6, and H616 CCU drivers to use .fw_name for parents, since those drivers hardcode two different global names for HOSC. And I had no opportunit to do that yet. However, I should really send something that 100% matches the current binding for SoCs where that exists (i.e. osc24M is a fixed clock), and doing so is a smaller job. On the other hand, having osc24M as an RTC *output* neatly sidesteps the fact that it has been missing from the input list :) (But on the other-other hand, A50 gets even more fun, as the HOSC crystal may not be 24MHz anymore. So the RTC has to choose one of three possible HOSC->LOSC dividers based on the HOSC frequency. But there is no register for HOSC frequency. So in this case it is convenient to have HOSC as a separate fixed clock input.) The basic idea of my patch is that using the CCU library code lets us cleanly have slightly different clock trees for each of the RTC variants that Allwinner comes up with. The secondary goal is to add support for osc32k calibration. An early version of the patch is here[1], and I will send something as soon as I have made the modifications described above. But I know you were skeptical about moving the clock part out of the RTC driver. So if you NACK that, somebody will have to add all of the variants to the RTC driver. Regards, Samuel [1]: https://github.com/smaeul/linux/commit/9510ca9e95cb.patch _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel