This adds support for the Radxa Zero SBC. The device-tree is loosely
based upon existing support for SEI510 and U200 (also G12A boards)
and has been developed with the 4/32 board configuration.

Christian Hewitt (2):
  dt-bindings: arm: amlogic: add support for Radxa Zero
  arm64: dts: amlogic: add support for Radxa Zero

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-g12a-radxa-zero.dts     | 418 ++++++++++++++++++
 3 files changed, 420 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel