Thread (27 messages) 27 messages, 2 authors, 2021-08-03

Re: [PATCH v3 08/13] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock

From: Patrice CHOTARD <patrice.chotard@foss.st.com>
Date: 2021-08-03 12:07:47
Also in: linux-devicetree, lkml

Hi Alain

On 3/31/21 10:42 PM, Alain Volmat wrote:
quoted hunk ↗ jump to hunk
The clkgen-fsyn driver now embed the clock names (assuming the
right compatible is used). Remove all clock-output-names property
and update when necessary the compatible.

Signed-off-by: Alain Volmat <redacted>
---
 arch/arm/boot/dts/stih410-clock.dtsi | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 3aeabdd6e305..6b0e6d4477a3 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -93,12 +93,6 @@
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
 		};
 
 		clk_s_c0: clockgen-c@9103000 {
@@ -150,15 +144,10 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d0";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
 		};
 
 		clockgen-d0@9104000 {
@@ -179,15 +168,10 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d2";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
 		};
 
 		clockgen-d2@9106000 {
@@ -210,15 +194,10 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,quadfs";
+			compatible = "st,quadfs-d3";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
 		};
 
 		clockgen-d3@9107000 {
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help