[PATCH] spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
From: <hidden>
Date: 2021-07-30 03:18:37
Also in:
linux-spi, lkml
Subsystem:
spi subsystem, the rest · Maintainers:
Mark Brown, Linus Torvalds
From: Quanyang Wang <redacted>
The function wait_for_completion_interruptible_timeout will return
-ERESTARTSYS immediately when receiving SIGKILL signal which is sent
by "jffs2_gcd_mtd" during umounting jffs2. This will break the SPI memory
operation because the data transmitting may begin before the command or
address transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Quanyang Wang <redacted>
---
drivers/spi/spi-zynq-qspi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 9262c6418463..cfa222c9bd5e 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c@@ -545,7 +545,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; }
@@ -563,7 +563,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; }
@@ -579,7 +579,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT;
@@ -603,7 +603,7 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); - if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion, + if (!wait_for_completion_timeout(&xqspi->data_completion, msecs_to_jiffies(1000))) err = -ETIMEDOUT; }
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel