,  Hi, Moudy

Moudy Ho [off-list ref] 於 2021年7月19日 週一 下午4:19寫道：

This patch adds driver for Media Data Path 3 (MDP3).
Each modules' related operation control is sited in mtk-mdp3-comp.c
Each modules' register table is defined in file with "mdp_reg_"
and "mmsys_" prefix
GCE related API, operation control  sited in mtk-mdp3-cmdq.c
V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
Probe, power, suspend/resume, system level functions are defined in
mtk-mdp3-core.c

Signed-off-by: Ping-Hsun Wu <redacted>
Signed-off-by: daoyuan huang <redacted>
Signed-off-by: Moudy Ho <redacted>
---
Depend on:
   [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20190906115513.159705-9-acourbot@chromium.org/
   [2] https://patchwork.kernel.org/project/linux-mediatek/patch/20190906115513.159705-10-acourbot@chromium.org/
---

[snip]

+
+static int mdp_path_subfrm_require(struct mdp_path_subfrm *subfrm,
+                                  const struct mdp_path *path,
+                                  struct mdp_cmd *cmd, u32 count)
+{
+       const struct img_config *config = path->config;
+       const struct mdp_comp_ctx *ctx;
+       phys_addr_t mm_mutex = path->mdp_dev->mm_mutex.reg_base;
+       s32 mutex_id = -1;
+       u32 mutex_sof = 0;
+       int mdp_color = 0;
+       int index;
+       u8 subsys_id = path->mdp_dev->mm_mutex.subsys_id;
+
+       /* Default value */
+       memset(subfrm, 0, sizeof(*subfrm));
+
+       for (index = 0; index < config->num_components; index++) {
+               ctx = &path->comps[index];
+               if (is_output_disable(ctx->param, count))
+                       continue;
+               switch (ctx->comp->id) {
+               /**********************************************
+                * Name            MSB LSB
+                * DISP_MUTEX_MOD   23   0
+                *
+                * Specifies which modules are in this mutex.
+                * Every bit denotes a module. Bit definition:
+                *  2 mdp_rdma0
+                *  4 mdp_rsz0
+                *  5 mdp_rsz1
+                *  6 mdp_tdshp
+                *  7 mdp_wrot0
+                *  8 mdp_wdma
+                *  13 mdp_color
+                *  23 mdp_aal
+                *  24 mdp_ccorr
+                **********************************************/
+               case MDP_AAL0:
+                       subfrm->mutex_mod |= 1 << 23;
+                       break;
+               case MDP_CCORR0:
+                       subfrm->mutex_mod |= 1 << 24;
+                       break;
+               case MDP_COLOR0:
+                       if (mdp_color)
+                               subfrm->mutex_mod |= 1 << 13;
+                       break;
+               case MDP_WDMA:
+                       subfrm->mutex_mod |= 1 << 8;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_WDMA;
+                       break;
+               case MDP_WROT0:
+                       subfrm->mutex_mod |= 1 << 7;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_WROT0;
+                       break;
+               case MDP_TDSHP0:
+                       subfrm->mutex_mod |= 1 << 6;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_TDSHP0;
+                       break;
+               case MDP_SCL1:
+                       subfrm->mutex_mod |= 1 << 5;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_SCL1;
+                       break;
+               case MDP_SCL0:
+                       subfrm->mutex_mod |= 1 << 4;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_SCL0;
+                       break;
+               case MDP_RDMA0:
+                       mutex_id = DISP_MUTEX_MDP_FIRST + 1;
+                       subfrm->mutex_mod |= 1 << 2;
+                       subfrm->sofs[subfrm->num_sofs++] = MDP_RDMA0;
+                       break;
+               case MDP_IMGI:
+                       mutex_id = DISP_MUTEX_MDP_FIRST;
+                       break;
+               case MDP_WPEI:
+                       mutex_id = DISP_MUTEX_MDP_FIRST + 3;
+                       break;
+               case MDP_WPEI2:
+                       mutex_id = DISP_MUTEX_MDP_FIRST + 4;
+                       break;
+               default:
+                       break;
+               }
+       }
+
+       subfrm->mutex_id = mutex_id;
+       if (-1 == mutex_id) {
+               mdp_err("No mutex assigned");
+               return -EINVAL;
+       }
+
+       if (subfrm->mutex_mod) {
+               /* Set mutex modules */
+               MM_REG_WRITE(cmd, subsys_id, mm_mutex, MM_MUTEX_MOD,
+                            subfrm->mutex_mod, 0x07FFFFFF);
+               MM_REG_WRITE(cmd, subsys_id, mm_mutex, MM_MUTEX_SOF,
+                            mutex_sof, 0x00000007);

Move mutex register setting to drivers/soc/mediatek/mtk-mutex.c, and
let mtk-mutex driver provide interface for mdp driver to use.

+       }
+       return 0;
+}
+

[snip]

+
+static int mdp_path_config_subfrm(struct mdp_cmd *cmd, struct mdp_path *path,
+                                 u32 count)
+{
+       struct mdp_path_subfrm subfrm;
+       const struct img_config *config = path->config;
+       const struct img_mmsys_ctrl *ctrl = &config->ctrls[count];
+       const struct img_mux *set;
+       struct mdp_comp_ctx *ctx;
+       phys_addr_t mmsys = path->mdp_dev->mmsys.reg_base;
+       int index, ret;
+       u8 subsys_id = path->mdp_dev->mmsys.subsys_id;
+
+       /* Acquire components */
+       ret = mdp_path_subfrm_require(&subfrm, path, cmd, count);
+       if (ret)
+               return ret;
+       /* Enable mux settings */
+       for (index = 0; index < ctrl->num_sets; index++) {
+               set = &ctrl->sets[index];
+               MM_REG_WRITE_MASK(cmd, subsys_id, mmsys, set->reg, set->value,
+                                 0xFFFFFFFF);

Move mmsys register setting to drivers/soc/mediatek/mtk-mmsys.c, and
let mtk-mmsys driver provide interface for mdp to use.

Regards,
Chun-Kuang.

+       }
+       /* Config sub-frame information */
+       for (index = (config->num_components - 1); index >= 0; index--) {
+               ctx = &path->comps[index];
+               if (is_output_disable(ctx->param, count))
+                       continue;
+               ret = call_op(ctx, config_subfrm, cmd, count);
+               if (ret)
+                       return ret;
+       }
+       /* Run components */
+       ret = mdp_path_subfrm_run(&subfrm, path, cmd);
+       if (ret)
+               return ret;
+       /* Wait components done */
+       for (index = 0; index < config->num_components; index++) {
+               ctx = &path->comps[index];
+               if (is_output_disable(ctx->param, count))
+                       continue;
+               ret = call_op(ctx, wait_comp_event, cmd);
+               if (ret)
+                       return ret;
+       }
+       /* Advance to the next sub-frame */
+       for (index = 0; index < config->num_components; index++) {
+               ctx = &path->comps[index];
+               ret = call_op(ctx, advance_subfrm, cmd, count);
+               if (ret)
+                       return ret;
+       }
+       /* Disable mux settings */
+       for (index = 0; index < ctrl->num_sets; index++) {
+               set = &ctrl->sets[index];
+               MM_REG_WRITE_MASK(cmd, subsys_id, mmsys, set->reg, 0,
+                                 0xFFFFFFFF);
+       }
+       return 0;
+}
+

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel