[PATCH 3/4] arm64: dts: ti: k3-am642-sk: Add ecap0 node
From: Lokesh Vutla <hidden>
Date: 2021-07-19 12:33:47
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
ecap0 can be configured to use pad ECAP0_IN_APWM_OUT (D18) which has a signal connected to Pin 1 of J3. Add support for adding this pinmux so that pwm can be observed on pin 1 of Header J3 Signed-off-by: Lokesh Vutla <redacted> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index d3aa2901e6fd..eb0d10e6e787 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts@@ -210,6 +210,12 @@ AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ >; }; + + main_ecap0_pins_default: main-ecap0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ + >; + }; }; &mcu_uart0 {
@@ -453,3 +459,9 @@ &pcie0_rc { &pcie0_ep { status = "disabled"; }; + +&ecap0 { + /* PWM is available on Pin 1 of header J3 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap0_pins_default>; +};
--
2.30.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel