Re: [PATCH 2/8] i2c: mediatek: Dump i2c/dma register when a timeout occurs
From: Chen-Yu Tsai <wenst@chromium.org>
Date: 2021-07-15 06:21:47
Also in:
linux-devicetree, linux-i2c, linux-mediatek, lkml
Hi, On Thu, Jul 15, 2021 at 10:31 AM Kewei Xu [off-list ref] wrote:
quoted hunk ↗ jump to hunk
When a timeout error occurs in i2c transter, it is usually related to the i2c/dma IP hardware configuration. Therefore, the purpose of this patch is to dump the key register values of i2c/dma when a timeout occurs in i2c for debugging. Signed-off-by: Kewei Xu <redacted> --- drivers/i2c/busses/i2c-mt65xx.c | 95 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-)diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 5ddfa4e..64acd96 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c@@ -125,6 +125,7 @@ enum I2C_REGS_OFFSET { OFFSET_HS, OFFSET_SOFTRESET, OFFSET_DCM_EN, + OFFSET_MULTI_DMA, OFFSET_PATH_DIR, OFFSET_DEBUGSTAT, OFFSET_DEBUGCTRL,@@ -192,6 +193,7 @@ enum I2C_REGS_OFFSET { [OFFSET_TRANSFER_LEN_AUX] = 0x44, [OFFSET_CLOCK_DIV] = 0x48, [OFFSET_SOFTRESET] = 0x50, + [OFFSET_MULTI_DMA] = 0x84,
On the datasheets I have, MULTI_DMA is 0x8c, while 0x84 is CHANNEL_SEC on MT8192, and not defined on MT8183 nor MT8195.
quoted hunk ↗ jump to hunk
[OFFSET_SCL_MIS_COMP_POINT] = 0x90, [OFFSET_DEBUGSTAT] = 0xe0, [OFFSET_DEBUGCTRL] = 0xe8,@@ -828,6 +830,96 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) return 0; } +static void i2c_dump_register(struct mtk_i2c *i2c) +{ + dev_err(i2c->dev, "SLAVE_ADDR[0x%x]: 0x%x, INTR_MASK[0x%x]: 0x%x\n", + OFFSET_SLAVE_ADDR, + (mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR)),
Drop the extra outer parentheses. Same goes for all the other invocations.
+ OFFSET_INTR_MASK, + (mtk_i2c_readw(i2c, OFFSET_INTR_MASK))); + dev_err(i2c->dev, "INTR_STAT[0x%x]: 0x%x, CONTROL[0x%x]: 0x%x\n", + OFFSET_INTR_STAT, + (mtk_i2c_readw(i2c, OFFSET_INTR_STAT)), + OFFSET_CONTROL, + (mtk_i2c_readw(i2c, OFFSET_CONTROL))); + dev_err(i2c->dev, "TRANSFER_LEN[0x%x]: 0x%x, TRANSAC_LEN[0x%x]: 0x%x\n", + OFFSET_TRANSFER_LEN, + (mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN)), + OFFSET_TRANSAC_LEN, + (mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN))); + dev_err(i2c->dev, "DELAY_LEN[0x%x]: 0x%x, HTIMING[0x%x]: 0x%x\n", + OFFSET_DELAY_LEN, + (mtk_i2c_readw(i2c, OFFSET_DELAY_LEN)), + OFFSET_TIMING, + (mtk_i2c_readw(i2c, OFFSET_TIMING))); + dev_err(i2c->dev, "OFFSET_START[0x%x]: 0x%x\n", + OFFSET_START, + mtk_i2c_readw(i2c, OFFSET_START)); + dev_err(i2c->dev, "OFFSET_EXT_CONF[0x%x]: 0x%x\n", + OFFSET_EXT_CONF, + mtk_i2c_readw(i2c, OFFSET_EXT_CONF)); + dev_err(i2c->dev, "OFFSET_HS[0x%x]: 0x%x\n", + OFFSET_HS, + mtk_i2c_readw(i2c, OFFSET_HS)); + dev_err(i2c->dev, "OFFSET_IO_CONFIG[0x%x]: 0x%x\n", + OFFSET_IO_CONFIG, + mtk_i2c_readw(i2c, OFFSET_IO_CONFIG)); + dev_err(i2c->dev, "OFFSET_FIFO_ADDR_CLR[0x%x]: 0x%x\n", + OFFSET_FIFO_ADDR_CLR, + mtk_i2c_readw(i2c, OFFSET_FIFO_ADDR_CLR)); + dev_err(i2c->dev, "TRANSFER_LEN_AUX[0x%x]: 0x%x\n", + OFFSET_TRANSFER_LEN_AUX, + mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX)); + dev_err(i2c->dev, "CLOCK_DIV[0x%x]: 0x%x\n", + OFFSET_CLOCK_DIV, + mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV)); + dev_err(i2c->dev, "FIFO_STAT[0x%x]: 0x%x, FIFO_THRESH[0x%x]: 0x%x\n", + OFFSET_FIFO_STAT, + mtk_i2c_readw(i2c, OFFSET_FIFO_STAT), + OFFSET_FIFO_THRESH, + mtk_i2c_readw(i2c, OFFSET_FIFO_THRESH)); + dev_err(i2c->dev, "DCM_EN[0x%x] 0x%x\n", + OFFSET_DCM_EN, + mtk_i2c_readw(i2c, OFFSET_DCM_EN)); + dev_err(i2c->dev, "DEBUGSTAT[0x%x]: 0x%x, DEBUGCTRL[0x%x]: 0x%x\n",
Nit: Why do some have two registers per line, and some only have one? ChenYu
quoted hunk ↗ jump to hunk
+ OFFSET_DEBUGSTAT, + (mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT)), + OFFSET_DEBUGCTRL, + (mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL))); + + if (i2c->dev_comp->regs == mt_i2c_regs_v2) { + dev_err(i2c->dev, "OFFSET_LTIMING[0x%x]: 0x%x\n", + OFFSET_LTIMING, + mtk_i2c_readw(i2c, OFFSET_LTIMING)); + dev_err(i2c->dev, "MULTI_DMA[0x%x]: 0x%x\n", + OFFSET_MULTI_DMA, + (mtk_i2c_readw(i2c, OFFSET_MULTI_DMA))); + } + + dev_err(i2c->dev, "OFFSET_INT_FLAG = 0x%x\n", + readl(i2c->pdmabase + OFFSET_INT_FLAG)); + dev_err(i2c->dev, "OFFSET_INT_EN = 0x%x\n", + readl(i2c->pdmabase + OFFSET_INT_EN)); + dev_err(i2c->dev, "OFFSET_EN = 0x%x\n", + readl(i2c->pdmabase + OFFSET_EN)); + dev_err(i2c->dev, "OFFSET_RST = 0x%x\n", + readl(i2c->pdmabase + OFFSET_RST)); + dev_err(i2c->dev, "OFFSET_CON = 0x%x\n", + readl(i2c->pdmabase + OFFSET_CON)); + dev_err(i2c->dev, "OFFSET_TX_MEM_ADDR = 0x%x\n", + readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR)); + dev_err(i2c->dev, "OFFSET_RX_MEM_ADDR = 0x%x\n", + readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR)); + dev_err(i2c->dev, "OFFSET_TX_LEN = 0x%x\n", + readl(i2c->pdmabase + OFFSET_TX_LEN)); + dev_err(i2c->dev, "OFFSET_RX_LEN = 0x%x\n", + readl(i2c->pdmabase + OFFSET_RX_LEN)); + dev_err(i2c->dev, "OFFSET_TX_4G_MODE = 0x%x\n", + readl(i2c->pdmabase + OFFSET_TX_4G_MODE)); + dev_err(i2c->dev, "OFFSET_RX_4G_MODE = 0x%x\n", + readl(i2c->pdmabase + OFFSET_RX_4G_MODE)); +} + static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, int num, int left_num) {@@ -1034,7 +1126,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, } if (ret == 0) { - dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr); + dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr); + i2c_dump_register(i2c); mtk_i2c_init_hw(i2c); return -ETIMEDOUT; } --1.9.1 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel