Re: [PATCH v6 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
From: Martin Kepplinger <hidden>
Date: 2021-07-14 18:08:23
Also in:
linux-devicetree, linux-media, linux-staging, lkml, phone-devel
Am Mittwoch, dem 14.07.2021 um 20:53 +0300 schrieb Laurent Pinchart:
Hi Martin, Thank you for the patch. On Wed, Jul 14, 2021 at 01:19:29PM +0200, Martin Kepplinger wrote:quoted
The i.MX8MQ SoC integrates a different MIPI CSI receiver as the i.MX8MM so describe the DT bindings for it. Signed-off-by: Martin Kepplinger <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 173 ++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yamldiff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml new file mode 100644 index 000000000000..97222485f223--- /dev/null +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml@@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id:http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MQ MIPI CSI-2 receiver + +maintainers: + - Martin Kepplinger [off-list ref] + +description: |- + This binding covers the CSI-2 RX PHY and host controller included in the + NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the + input imaging devices. + +properties: + compatible: + enum: + - fsl,imx8mq-mipi-csi2 + + reg: + maxItems: 1 + + clocks: + items: + - description: core is the RX Controller Core Clock input. This clock + must be exactly equal to or faster than the receive + byteclock from the RX DPHY. + - description: esc is the Rx Escape Clock. This must be the same escape + clock that the RX DPHY receives. + - description: ui is the pixel clock (phy_ref up to 333Mhz).Where did you get the 333MHz limit from ? The information I've received indicate a limit of 125MHz for the UI clock (and 266 and 133 MHz for the core and esc clocks respectively).
The latest ref.manual revison has this corrected to 333Mhz. Look at the "changelog" they have in the RM, to find it quickly.
With this addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>quoted
+ See the reference manual for details. + + clock-names: + items: + - const: core + - const: esc + - const: ui + + power-domains: + maxItems: 1 + + resets: + items: + - description: CORE_RESET reset register bit definition + - description: PHY_REF_RESET reset register bit definition + - description: ESC_RESET reset register bit definition + + fsl,mipi-phy-gpr: + description: | + The phandle to the imx8mq syscon iomux-gpr with the register + for setting RX_ENABLE for the mipi receiver. + + The format should be as follows: + <gpr req_gpr> + gpr is the phandle to general purpose register node. + req_gpr is the gpr register offset of RX_ENABLE for the mipi phy. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset containing + CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively. + maximum: 0xff + + interconnects: + maxItems: 1 + + interconnect-names: + const: dram + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + items: + minItems: 1 + maxItems: 4 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - resets + - fsl,mipi-phy-gpr + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/interconnect/imx8mq.h> + + csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <200000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&imx477_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@1 { + reg = <1>; + + imx8mm_mipi_csi_out: endpoint { + remote-endpoint = <&csi_in>; + }; + }; + }; + }; + +...
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel