Re: [PATCH v3 1/1] psi: stop relying on timer_pending for poll_work rescheduling

From
Suren Baghdasaryan <surenb@google.com>
Date
2021-07-08 15:55:13
Also in
linux-mediatek, lkml
Reply to
Johannes Weiner, 2021-07-08
 t

On Thu, Jul 8, 2021 at 7:44 AM Johannes Weiner [off-list ref] wrote:
On Wed, Jul 07, 2021 at 03:43:48PM -0700, Suren Baghdasaryan wrote:
quoted
On Wed, Jul 7, 2021 at 6:39 AM Johannes Weiner [off-list ref] wrote:
quoted
This looks good to me now code wise. Just a comment on the comments:

On Tue, Jul 06, 2021 at 07:39:33PM -0700, Suren Baghdasaryan wrote:
quoted
@@ -559,18 +560,14 @@ static u64 update_triggers(struct psi_group *group, u64 now)
      return now + group->poll_min_period;
 }

-/* Schedule polling if it's not already scheduled. */
-static void psi_schedule_poll_work(struct psi_group *group, unsigned long delay)
+/* Schedule polling if it's not already scheduled or forced. */
+static void psi_schedule_poll_work(struct psi_group *group, unsigned long delay,
+                                bool force)
 {
      struct task_struct *task;

-     /*
-      * Do not reschedule if already scheduled.
-      * Possible race with a timer scheduled after this check but before
-      * mod_timer below can be tolerated because group->polling_next_update
-      * will keep updates on schedule.
-      */
-     if (timer_pending(&group->poll_timer))
+     /* xchg should be called even when !force to set poll_scheduled */
+     if (atomic_xchg(&group->poll_scheduled, 1) && !force)
              return;
This explains what the code does, but not why. It would be good to
explain the ordering with poll_work, here or there. But both sides
should mention each other.
How about this:

/*
 * atomic_xchg should be called even when !force to always set poll_scheduled
 * and to provide a memory barrier (see the comment inside psi_poll_work).
 */
The memory barrier part makes sense, but the first part says what the
code does and the message is unclear to me. Are you worried somebody
might turn this around in the future and only conditionalize on
poll_scheduled when !force? Essentially, I don't see the downside of
dropping that. But maybe I'm missing something.
Actually you are right. Originally I was worried that there might be a
case when poll_scheduled==0 and force==true and if someone flips the
conditions we will reschedule the timer but will not set
poll_scheduled back to 1. However I don't think this condition is
possible. We set force=true only when we skipped resetting
poll_schedule to 0 and on initial wakeup we always reset
poll_schedule. How about changing the comment to this:

 /*
  * atomic_xchg should be called even when !force to provide a
  * full memory barrier (see the comment inside psi_poll_work).
  */
        /*
         * The xchg implies a full barrier that matches the one
         * in psi_poll_work() (see corresponding comment there).
         */
quoted
quoted
quoted
@@ -595,6 +595,28 @@ static void psi_poll_work(struct psi_group *group)

      now = sched_clock();

+     if (now > group->polling_until) {
+             /*
+              * We are either about to start or might stop polling if no
+              * state change was recorded. Resetting poll_scheduled leaves
+              * a small window for psi_group_change to sneak in and schedule
+              * an immegiate poll_work before we get to rescheduling. One
+              * potential extra wakeup at the end of the polling window
+              * should be negligible and polling_next_update still keeps
+              * updates correctly on schedule.
+              */
+             atomic_set(&group->poll_scheduled, 0);
+             /*
+              * Ensure that operations of clearing group->poll_scheduled and
+              * obtaining changed_states are not reordered.
+              */
+             smp_mb();
Same here, it would be good to explain that this is ordering the
scheduler with the timer such that no events are missed. Feel free to
reuse my race diagram from the other thread - those are better at
conveying the situation than freeform text.
I tried to make your diagram a bit less abstract by using the actual
names. How about this?

/*
 * We need to enforce ordering between poll_scheduled and psi_group_cpu.times
 * reads and writes in psi_poll_work and psi_group_change functions.
Otherwise we
 * might fail to reschedule the timer when monitored states change:
 *
 * psi_poll_work:
 *     poll_scheduled = 0
 *     smp_mb()
 *     changed_states = collect_percpu_times()
 *     if changed_states && xchg(poll_scheduled, 1) == 0
 *         mod_timer()
Those last two lines aren't relevant for the race, right? I'd leave
those out to not distract from it.
They did help me illustrate the two failure cases but yeah, someone
who can read the code can derive the rest :)
quoted
 * psi_group_change:
 *     record_times()
 *     smp_mb()
 *     if xchg(poll_scheduled, 1) == 0
 *         mod_timer()
The reason I tend to keep these more abstract is because 1) the names
of the functions change (I had already sent out patches to rename half
the variable and function names in this diagram), while the
architecture (task change vs poll worker) likely won't, and 2) because
it's easy to drown out what the reads, writes, and thus the race
condition is with code details and function call indirections.
Got it.
How about a compromise?

/*
 * A task change can race with the poll worker that is supposed to
 * report on it. To avoid missing events, ensure ordering between
 * poll_scheduled and the task state accesses, such that if the poll
 * worker misses the state update, the task change is guaranteed to
 * reschedule the poll worker:
 *
 * poll worker:
 *   atomic_set(poll_scheduled, 0)
 *   smp_mb()
 *   LOAD states
 *
 * task change:
 *   STORE states
 *   if atomic_xchg(poll_scheduled, 1) == 0:
 *     schedule poll worker
 *
 * The atomic_xchg() implies a full barrier.
 */
 smp_mb();

This gives a high-level view of what's happening but it can still be
mapped to the code by following the poll_scheduled variable.
This looks really good to me.
If you agree on the first comment modification, should I respin the
next version?
quoted
If we remove smp_mb barriers then there are the following possible
reordering cases:

Case1: reordering in psi_poll_work
psi_poll_work                    psi_group_change
  changed_states = collect_percpu_times()
                                              record_times()
                                              if xchg(poll_scheduled,
1) == 0 <-- false
                                                  mod_timer()
  poll_scheduled = 0
  if changed_states && xchg(poll_scheduled, 1) == 0 <-- changed_states is false
      mod_timer()

Case2: reordering in psi_group_change
psi_poll_work                    psi_group_change
                                              if xchg(poll_scheduled,
1) == 0 <-- false
                                                  mod_timer()
  poll_scheduled = 0
  changed_states = collect_percpu_times()
                                                  record_times()
  if changed_states && xchg(poll_scheduled, 1) == 0 <-- changed_states is false
      mod_timer()

In both cases mod_timer() is not called, poll update is missed. But
describing this all in the comments would be an overkill IMHO.
WDYT?
Yeah, I also think that's overkill. The failure cases can be derived
from the concurrency diagram and explanation.

Thanks
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Thread (8 messages) 8 messages, 2 authors, last reply 2021-07-08
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help