Thread (15 messages) flat view 15 messages, 2 authors, 2021-06-11
STALE1884d

[PATCH v3 net-next 12/13] net: dsa: sja1105: SGMII and 2500base-x on the SJA1110 are 'special'

From: Vladimir Oltean <olteanv@gmail.com>
Date: 2021-06-11 20:53:08
Also in: netdev
Subsystem: networking drivers, networking [dsa], the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds

From: Vladimir Oltean <vladimir.oltean@nxp.com>

For the xMII Mode Parameters Table to be properly configured for SGMII
mode on SJA1110, we need to set the "special" bit, since SGMII is
officially bitwise coded as 0b0011 in SJA1105 (decimal 3, equal to
XMII_MODE_SGMII), and as 0b1011 in SJA1110 (decimal 11).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v2->v3: none
v1->v2: none

 drivers/net/dsa/sja1105/sja1105_main.c | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index bd1f2686e37d..3e32b8676fa7 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -209,12 +209,14 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv)
 				goto unsupported;
 
 			mii->xmii_mode[i] = XMII_MODE_SGMII;
+			mii->special[i] = true;
 			break;
 		case PHY_INTERFACE_MODE_2500BASEX:
 			if (!priv->info->supports_2500basex[i])
 				goto unsupported;
 
 			mii->xmii_mode[i] = XMII_MODE_SGMII;
+			mii->special[i] = true;
 			break;
 unsupported:
 		default:
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help