[PATCH 06/24] iommu/mediatek: Add a flag DCM_DISABLE
flat view
STALE1920d
SUPERSEDED
From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-30 02:36:13
Also in:
linux-devicetree, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
Revision v1 of 6 in this series.
Revisions (6)
In the infra iommu, we should disable DCM. add a new flag for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/iommu/mtk_iommu.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 78b35e187c78..a026e2ee4007 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -53,6 +53,8 @@ #define F_MMU_STANDARD_AXI_MODE_MASK (BIT(3) | BIT(19)) #define REG_MMU_DCM_DIS 0x050 +#define F_MMU_DCM BIT(8) + #define REG_MMU_WR_LEN_CTRL 0x054 #define F_MMU_WR_THROT_DIS_MASK (BIT(5) | BIT(21))
@@ -121,6 +123,7 @@ #define HAS_LEGACY_IVRP_PADDR BIT(7) #define IOVA_34_EN BIT(8) #define SHARE_PGTABLE BIT(9) /* 2 HW share pgtable */ +#define DCM_DISABLE BIT(10) #define MTK_IOMMU_HAS_FLAG(pdata, _x) \ ((((pdata)->flags) & (_x)) == (_x))
@@ -738,7 +741,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data) regval = F_MMU_VLD_PA_RNG(7, 4); writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG); } - writel_relaxed(0, data->base + REG_MMU_DCM_DIS); + if (MTK_IOMMU_HAS_FLAG(data->plat_data, DCM_DISABLE)) + writel_relaxed(F_MMU_DCM, data->base + REG_MMU_DCM_DIS); + else + writel_relaxed(0, data->base + REG_MMU_DCM_DIS); + if (MTK_IOMMU_HAS_FLAG(data->plat_data, WR_THROT_EN)) { /* write command throttling mode */ regval = readl_relaxed(data->base + REG_MMU_WR_LEN_CTRL);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel