Thread (67 messages) 67 messages, 8 authors, 2021-09-21
STALE1762d
Revisions (2)
  1. v1 current
  2. v2 [diff vs current]

[PATCH 00/10] serial: mvebu-uart: Fixes and new support for higher baudrates

From: Pali Rohár <pali@kernel.org>
Date: 2021-06-24 22:50:02
Also in: linux-clk, linux-serial, lkml

This patch series fixes mvebu-uart driver used on Marvell Armada 37xx
boards and add support for baudrates higher than 230400.

Pali Rohár (10):
  serial: mvebu-uart: fix calculation of clock divisor
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not
    available
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  dt-bindings: mvebu-uart: fix documentation
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  serial: mvebu-uart: implement UART clock driver for configuring UART
    base clock
  dt-bindings: mvebu-uart: document DT bindings for
    marvell,armada-3700-uart-clock
  arm64: dts: marvell: armada-37xx: add device node for UART clock and
    use it
  serial: mvebu-uart: implement support for baudrates higher than 230400

 .../bindings/clock/armada3700-uart-clock.txt  |  24 +
 .../devicetree/bindings/serial/mvebu-uart.txt |  15 +-
 .../arm64/boot/dts/marvell/armada-3720-db.dts |   4 +
 .../dts/marvell/armada-3720-espressobin.dtsi  |   4 +
 .../dts/marvell/armada-3720-turris-mox.dts    |   4 +
 .../boot/dts/marvell/armada-3720-uDPU.dts     |   4 +
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |  17 +-
 drivers/tty/serial/mvebu-uart.c               | 603 +++++++++++++++++-
 8 files changed, 645 insertions(+), 30 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/armada3700-uart-clock.txt

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help