Hi Anand,

On Fri, Jun 18, 2021 at 3:20 PM Anand Moon [off-list ref] wrote:
[...]

(some email id got messed up while sending these changes.)

it happened to me before: don't worry, it's something that can be fixed

[...]

quoted

quoted

Initially if we connect USB HDD at initial boot it get detected.
but after that usb hotplug of USB HDD is broken.
I did not observe and USB debug events messages to trace the root cause.

Another issue I observed is increase of USB interrupts event
even if there is not much activity on USB ports.
I tried some clk changes but it did not workout for me.

I suggest reporting this to the dwc2 maintainers and asking for advice
on how to debug these issues.

Yes I have enabled the CONFIG_USB_DWC2_DEBUG
to help debug this issue but could not find much clue on
why this is happening.

I think CONFIG_USB_DWC2_DEBUG is a good starting point.
For myself I came to the conclusion that the dwc2 IP is too complex to
understand without additional information
Some additional information can be found in public datasheets of other
SoCs which are also using a dwc2 core, see for example RK3128 [0] or
RT3050 [1]
That's why my suggestion is to additionally ask the dwc2 maintainers
(which are not Cc'ed on this mail) for debugging suggestions.


Best regards,
Martin


[0] https://rockchip.fr/RK312X%20TRM/chapter-26-usb-otg-2-0.pdf
[1] http://static6.arrow.com/aropdfconversion/aa9a14376a75e7c5d6daa9f6aaed8411909d2021/rt3050_5x_v2.0_081408_0902.pdf

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel