Re: [PATCH 1/2] dt-bindings: phy: Add the Amlogic Meson8 HDMI TX PHY bindings
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2021-06-17 22:30:21
Also in:
linux-amlogic, linux-devicetree, linux-phy, lkml
Hi Rob, On Thu, Jun 17, 2021 at 1:31 AM Rob Herring [off-list ref] wrote: [...]
quoted
+description: |+ + The HDMI TX PHY node should be the child of a syscon node with the + required property: + + compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"Is there a sub range of registers for this functionality in "amlogic,meson-hhi-sysctrl"? If so, please add a 'reg' property.
yes, for this part of the HHI registers there's a dedicated sub range. I'll add a reg property with register offset and size one question about .dts validation: at least the clock controller (which is also a sub-node of this) does not have a dedicated sub range. Is it still OK in this case to set #size-cells = <1> and #address-cells = <1> in the HHI node? Best regards, Martin _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel