-----Original Message-----

From: Lars-Peter Clausen <lars@metafoo.de>
Sent: Thursday, April 15, 2021 1:03 PM
To: Radhey Shyam Pandey <redacted>; vkoul@kernel.org;
robh+dt@kernel.org; Michal Simek [off-list ref]
Cc: dmaengine@vger.kernel.org; devicetree@vger.kernel.org; linux-arm-
kernel@lists.infradead.org; linux-kernel@vger.kernel.org; git
[off-list ref]
Subject: Re: [RFC v2 PATCH 7/7] dmaengine: xilinx_dma: Program interrupt
delay timeout

On 4/9/21 7:56 PM, Radhey Shyam Pandey wrote:

quoted

Program IRQDelay for AXI DMA. The interrupt timeout mechanism causes
the DMA engine to generate an interrupt after the delay time period
has expired. It enables dmaengine to respond in real-time even though
interrupt coalescing is configured. It also remove the placeholder
for delay interrupt and merge it with frame completion interrupt.
Since by default interrupt delay timeout is disabled this feature
addition has no functional impact on VDMA and CDMA IP's.

In my opinion this should not come from the devicetree. This setting is
application specific and should be configured through a runtime API.

The inclination for reading irq delay from DT was to minimize creating custom 
interface for clients. For example - If we use xilinx_vdma_channel_set_config
API in ethernet driver it won't be then generic enough to be hooked to any 
other dmaengine client. Any thoughts on it?  With DT only limitation is it's
not runtime programmable.

Thanks,
Radhey

For the VDMA there is already xilinx_vdma_channel_set_config() which
allows to configure the maximum number of IRQs that can be coalesced and
the IRQ delay. Something similar is probably needed for the AXIDMA.

quoted

Signed-off-by: Radhey Shyam Pandey <redacted>
---
Changes for v2:
- Read irq delay timeout value from DT.
- Merge interrupt processing for frame done and delay interrupt.
---
  drivers/dma/xilinx/xilinx_dma.c | 20 +++++++++++---------
  1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c

b/drivers/dma/xilinx/xilinx_dma.c

quoted

index a2ea2d649332..0c0dc9882a01 100644

--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c

@@ -173,8 +173,10 @@
  #define XILINX_DMA_MAX_TRANS_LEN_MAX	23
  #define XILINX_DMA_V2_MAX_TRANS_LEN_MAX	26
  #define XILINX_DMA_CR_COALESCE_MAX	GENMASK(23, 16)
+#define XILINX_DMA_CR_DELAY_MAX		GENMASK(31, 24)
  #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK	BIT(4)
  #define XILINX_DMA_CR_COALESCE_SHIFT	16
+#define XILINX_DMA_CR_DELAY_SHIFT	24
  #define XILINX_DMA_BD_SOP		BIT(27)
  #define XILINX_DMA_BD_EOP		BIT(26)
  #define XILINX_DMA_BD_COMP_MASK		BIT(31)

@@ -410,6 +412,7 @@ struct xilinx_dma_tx_descriptor {
   * @stop_transfer: Differentiate b/w DMA IP's quiesce
   * @tdest: TDEST value for mcdma
   * @has_vflip: S2MM vertical flip
+ * @irq_delay: Interrupt delay timeout
   */
  struct xilinx_dma_chan {
  	struct xilinx_dma_device *xdev;

@@ -447,6 +450,7 @@ struct xilinx_dma_chan {
  	int (*stop_transfer)(struct xilinx_dma_chan *chan);
  	u16 tdest;
  	bool has_vflip;
+	u8 irq_delay;
  };

  /**

@@ -1555,6 +1559,9 @@ static void xilinx_dma_start_transfer(struct

xilinx_dma_chan *chan)

quoted

  	if (chan->has_sg)
  		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
  			     head_desc->async_tx.phys);
+	reg  &= ~XILINX_DMA_CR_DELAY_MAX;
+	reg  |= chan->irq_delay << XILINX_DMA_CR_DELAY_SHIFT;
+	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);

  	xilinx_dma_start(chan);

@@ -1877,15 +1884,8 @@ static irqreturn_t xilinx_dma_irq_handler(int

irq, void *data)

quoted

  		}
  	}

-	if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
-		/*
-		 * Device takes too long to do the transfer when user

requires

quoted

-		 * responsiveness.
-		 */
-		dev_dbg(chan->dev, "Inter-packet latency too long\n");
-	}
-
-	if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
+	if (status & (XILINX_DMA_DMASR_FRM_CNT_IRQ |
+		      XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
  		spin_lock(&chan->lock);
  		xilinx_dma_complete_descriptor(chan);
  		chan->idle = true;

@@ -2802,6 +2802,8 @@ static int xilinx_dma_chan_probe(struct

xilinx_dma_device *xdev,

quoted

  	/* Retrieve the channel properties from the device tree */
  	has_dre = of_property_read_bool(node, "xlnx,include-dre");

+	of_property_read_u8(node, "xlnx,irq-delay", &chan->irq_delay);
+
  	chan->genlock = of_property_read_bool(node, "xlnx,genlock-

mode");

quoted

  	err = of_property_read_u32(node, "xlnx,datawidth", &value);

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel