Re: [PATCH] arm64: dts: ti: k3-am642-main: fix ports mac properties
From: Vignesh Raghavendra <vigneshr@ti.com>
Date: 2021-06-09 05:12:58
Also in:
linux-devicetree, lkml
On 6/9/21 12:19 AM, Grygorii Strashko wrote:
The current device tree CPSW3g node adds non-zero "mac-address" property to
the ports, which prevents random MAC address assignment to network devices
if bootloader failed to update DT. This may cause more then one host to
have the same MAC in the network.
mac-address = [00 00 de ad be ef];
mac-address = [00 01 de ad be ef];
In addition, there is one MAC address available in eFuse registers which
can be used for default port 1.
Hence, fix ports MAC properties by:
- resetting "mac-address" property to 0
- adding ti,syscon-efuse = <&main_conf 0x200> to Port 1
Fixes: 3753b12877b6 ("arm64: dts: ti: k3-am64-main: Add CPSW DT node")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
quoted hunk ↗ jump to hunk
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index effb9d2e3c25..7f7178a7a055 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi@@ -514,7 +514,8 @@ ti,mac-only; label = "port1"; phys = <&phy_gmii_sel 1>; - mac-address = [00 00 de ad be ef]; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&main_conf 0x200>; }; cpsw_port2: port@2 {@@ -522,7 +523,7 @@ ti,mac-only; label = "port2"; phys = <&phy_gmii_sel 2>; - mac-address = [00 01 de ad be ef]; + mac-address = [00 00 00 00 00 00]; }; };
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel