Re: [PATCH v5 03/10] ARM: dts: aspeed-g6: Add SGPIO node.
From: Andrew Jeffery <hidden>
Date: 2021-06-09 02:20:17
Also in:
linux-aspeed, linux-devicetree, linux-gpio, lkml
On Wed, 9 Jun 2021, at 11:21, Steven Lee wrote:
The 06/09/2021 08:43, Andrew Jeffery wrote:quoted
On Tue, 8 Jun 2021, at 19:55, Steven Lee wrote:quoted
AST2600 supports 2 SGPIO master interfaces one with 128 pins another one with 80 pins. Signed-off-by: Steven Lee <redacted> --- arch/arm/boot/dts/aspeed-g6.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index f96607b7b4e2..c55baaf94314 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi@@ -377,6 +377,34 @@ #interrupt-cells = <2>; }; + sgpiom0: sgpiom@1e780500 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-sgpiom-128"; + reg = <0x1e780500 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB2>;The example in the binding document used ASPEED_CLK_APB. Which is correct? I assume ASPEED_CLK_APB2?The example in the binding document is for aspeed-g5. aspeed-g5 and aspeed-g6 use different clocks. Should I add a new patch for adding an example for aspeed-g6?
Oh, I missed that. Never mind then! Reviewed-by: Andrew Jeffery <redacted> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel