On Mon, Jun 07, 2021 at 02:45:01PM +0200, Steen Hegelund wrote:

Hi Russell,

Thanks for your comments.

On Mon, 2021-06-07 at 10:15 +0100, Russell King (Oracle) wrote:

quoted

3) I really don't get what's going on with setting the port mode to
   2500base-X and 1000base-X here when state->interface is 10GBASER.

The high speed interfaces (> 2.5G) do not support any in-band signalling, so the only way that e.g a
10G interface running at 2.5G will be able to link up with its partner is if both ends configure the
speed manually via ethtool.

We really should not have drivers hacking around in this way. If we want
to operate in 2500base-x or 1000base-x, then that is what phylink should
be telling the MAC driver. The MAC driver should not be making these
decisions in its mac_config() callback. Doing so makes a joke of kernel
programming.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel