[PATCH v2 5/7] arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
From: Neil Armstrong <hidden>
Date: 2021-06-07 06:55:51
Also in:
linux-amlogic, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
As described in the HC4 schematics, GPIOH_8 controls the USB 5V and 12V regulators used to power the SATA drives. And is set as Open Drain since this GPIO doesn't support Push-Pull. Signed-off-by: Neil Armstrong <redacted> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- .../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index 0a34b658f994..fdad6b994c88 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts@@ -44,6 +44,32 @@ led-red { }; }; + /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ + p12v_0: regulator-p12v_0 { + compatible = "regulator-fixed"; + regulator-name = "P12V_0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ + p12v_1: regulator-p12v_1 { + compatible = "regulator-fixed"; + regulator-name = "P12V_1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + sound { model = "ODROID-HC4"; };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel