Re: [PATCH v3 1/4] arm64: dts: imx8mq: add Nitrogen8 SoM
From: Rob Herring <robh@kernel.org>
Date: 2021-05-24 22:59:34
Also in:
linux-devicetree
On Mon, 24 May 2021 14:45:33 +0200, Lucas Stach wrote:
This adds the description of the Nitrogen8 System on Module. The module is quite simple with only a few (almost) fixed regulators and a eMMC on-board. The eMMC is currently limited to 50MHz modes via the pinctrl, as the board has not wired up the data strobe line, which prevents HS400 mode from working. As both the controller and the eMMC support this mode, it is automatically selected when we allow the faster modes, leading to failing transfers. Until we have a proper solution to only disable HS400 mode, keep the eMMC at the slow bus modes. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- v2: - remove 100/200MHz pinctrl states for usdhc1 - rename i2c nodes --- .../devicetree/bindings/arm/fsl.yaml | 1 + .../dts/freescale/imx8mq-nitrogen-som.dtsi | 242 ++++++++++++++++++ 2 files changed, 243 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel