[PATCH 1/4] arm64: dts: bitmain: normalize the node name of the UART devices
From: Zhen Lei <hidden>
Date: 2021-05-19 14:19:28
Also in:
linux-devicetree
Subsystem:
arm/bitmain architecture, the rest · Maintainers:
Manivannan Sadhasivam, Linus Torvalds
Change the node name of the UART devices to match "^serial(@[0-9a-f,]+)*$". Signed-off-by: Zhen Lei <redacted> --- arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b76057aa..22a200fb07d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi@@ -184,7 +184,7 @@ status = "disabled"; }; - uart1: serial@5801A000 { + uart1: serial@5801a000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801a000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@ status = "disabled"; }; - uart2: serial@5801C000 { + uart2: serial@5801c000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801c000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@ status = "disabled"; }; - uart3: serial@5801E000 { + uart3: serial@5801e000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801e000 0x0 0x2000>; clocks = <&clk BM1880_CLK_UART_500M>,
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel