Thread (73 messages) 73 messages, 6 authors, 2021-07-02
STALE1842d REVIEWED: 2 (2M)

[PATCH 10/42] PCI: aardvark: Implement workaround for the readback value of VEND_ID

From: Pali Rohár <pali@kernel.org>
Date: 2021-05-06 15:35:33
Also in: linux-pci, lkml
Subsystem: pci driver for aardvark (marvell armada 3700), pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers: Thomas Petazzoni, Pali Rohár, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds

Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):

    The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it
    should read 11ABh.

    The firmware can write the correct value, 11ABh, through VEND_ID
    (RD0076044h [15:0]).

Implement this workaround in aardvark driver for both PCI vendor id and PCI
subsystem vendor id.

This change affects and fixes PCI vendor id of emulated PCIe root bridge.
After this change emulated PCIe root bridge has correct vendor id.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Cc: stable@vger.kernel.org
---
 drivers/pci/controller/pci-aardvark.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 873efd79fffb..cd4b427d7692 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -126,6 +126,7 @@
 #define     LTSSM_MASK				0x3f
 #define     LTSSM_L0				0x10
 #define     RC_BAR_CONFIG			0x300
+#define VENDOR_ID_REG				(LMI_BASE_ADDR + 0x44)
 
 /* PCIe core controller registers */
 #define CTRL_CORE_BASE_ADDR			0x18000
@@ -340,6 +341,16 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg |= (IS_RC_MSK << IS_RC_SHIFT);
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
+	/*
+	 * Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
+	 * VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
+	 * id in high 16 bits. Updating this register changes readback value of
+	 * read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
+	 * for erratum 4.1: "The value of device and vendor ID is incorrect".
+	 */
+	reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
+	advk_writel(pcie, reg, VENDOR_ID_REG);
+
 	/* Set Advanced Error Capabilities and Control PF0 register */
 	reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help