[PATCH] spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code
From: zpershuai <hidden>
Date: 2021-05-27 10:21:24
Also in:
linux-spi, lkml
Subsystem:
spi subsystem, the rest · Maintainers:
Mark Brown, Linus Torvalds
In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by: zpershuai <redacted> --- drivers/spi/spi-zynq-qspi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5a3d81c31d04..9262c6418463 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c@@ -678,14 +678,14 @@ static int zynq_qspi_probe(struct platform_device *pdev) xqspi->irq = platform_get_irq(pdev, 0); if (xqspi->irq <= 0) { ret = -ENXIO; - goto remove_master; + goto clk_dis_all; } ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq, 0, pdev->name, xqspi); if (ret != 0) { ret = -ENXIO; dev_err(&pdev->dev, "request_irq failed\n"); - goto remove_master; + goto clk_dis_all; } ret = of_property_read_u32(np, "num-cs",
@@ -693,8 +693,9 @@ static int zynq_qspi_probe(struct platform_device *pdev) if (ret < 0) { ctlr->num_chipselect = 1; } else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) { + ret = -EINVAL; dev_err(&pdev->dev, "only 2 chip selects are available\n"); - goto remove_master; + goto clk_dis_all; } else { ctlr->num_chipselect = num_cs; }
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel