[PATCH 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller
From: Adam Ford <hidden>
Date: 2021-05-25 01:07:54
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
The USB OTG controller cannot be used until the power-domain is enabled unless it was started in the bootloader. Adding the power-domain reference to the OTG node allows the OTG controller to operate. Signed-off-by: Adam Ford <redacted>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 0eb64b59c8e3..8b1fb83cb893 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi@@ -1009,6 +1009,7 @@ usbotg1: usb@32e40000 { assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel