[PATCH v6 12/17] phy: sun4i-usb: Introduce port2 SIDDQ quirk
From: Andre Przywara <andre.przywara@arm.com>
Date: 2021-05-19 10:43:01
Also in:
linux-phy, linux-sunxi, linux-usb, lkml
Subsystem:
generic phy framework, the rest · Maintainers:
Vinod Koul, Linus Torvalds
At least the Allwinner H616 SoC requires a weird quirk to make most USB PHYs work: Only port2 works out of the box, but all other ports need some help from this port2 to work correctly: The CLK_BUS_PHY2 and RST_USB_PHY2 clock and reset need to be enabled, and the SIDDQ bit in the PMU PHY control register needs to be cleared. For this register to be accessible, CLK_BUS_ECHI2 needs to be ungated. Don't ask .... Instead of disguising this as some generic feature, do exactly that in our PHY init: If the quirk bit is set, and we initialise a PHY other than PHY2, ungate this one special clock, and clear the SIDDQ bit. We can pull in the other required clocks via the DT. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/phy/allwinner/phy-sun4i-usb.c | 29 +++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 126ef74d013c..ed7b9cc5a424 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c@@ -120,6 +120,7 @@ struct sun4i_usb_phy_cfg { u8 phyctl_offset; bool dedicated_clocks; bool phy0_dual_route; + bool needs_phy2_siddq; int missing_phys; };
@@ -331,6 +332,27 @@ static int sun4i_usb_phy_init(struct phy *_phy) queue_delayed_work(system_wq, &data->detect, 0); } + /* Some PHYs on some SoCs need the help of PHY2 to work. */ + if (data->cfg->needs_phy2_siddq && phy->index != 2) { + struct sun4i_usb_phy *phy2 = &data->phys[2]; + + /* + * This extra clock is just needed to access the + * REG_HCI_PHY_CTL PMU register for PHY2. + */ + ret = clk_prepare_enable(phy2->clk2); + if (ret) + return ret; + + if (phy2->pmu && data->cfg->hci_phy_ctl_clear) { + val = readl(phy2->pmu + REG_HCI_PHY_CTL); + val &= ~data->cfg->hci_phy_ctl_clear; + writel(val, phy2->pmu + REG_HCI_PHY_CTL); + } + + clk_disable_unprepare(phy->clk2); + } + return 0; }
@@ -785,6 +807,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) dev_err(dev, "failed to get clock %s\n", name); return PTR_ERR(phy->clk2); } + } else { + snprintf(name, sizeof(name), "pmu%d_clk", i); + phy->clk2 = devm_clk_get_optional(dev, name); + if (IS_ERR(phy->clk2)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk2); + } } snprintf(name, sizeof(name), "usb%d_reset", i);
--
2.17.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel