[PATCH 1/3] ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
From: Quan Nguyen <quan@os.amperecomputing.com>
Date: 2021-05-17 04:02:26
Also in:
linux-aspeed, lkml, openbmc
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable OCP card support on Ampere's Mt. Jade BMC. The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade hardware reference platform with Ampere's Altra Processor Family. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Phong Vo <redacted> Signed-off-by: Thang Q. Nguyen <redacted> --- arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 8f5ec22e51c2..282e901092a6 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts@@ -332,6 +332,16 @@ &uart5 { status = "okay"; }; +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &mac1 { status = "okay"; pinctrl-names = "default";
@@ -540,7 +550,8 @@ &gpio { /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "","","","","","UID_BUTTON","","", - /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN", + "OCP_MAIN_PWREN","RESET_BUTTON","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","",
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel