[PATCH v3 2/7] ARM i.MX6q: remove part of ar8031_phy_fixup()
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-05-11 04:38:28
Also in:
lkml, netdev
Subsystem:
arm port, the rest · Maintainers:
Russell King, Linus Torvalds
This part of this fixup is overwritten by at803x_config_init() in drivers/net/phy/at803x.c. No additional devicetree fixes are needed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/mach-imx6q.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 78205f90da27..1abefe7e1c3a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c@@ -82,12 +82,6 @@ static int ar8031_phy_fixup(struct phy_device *dev) val |= 0x18; phy_write(dev, 0xe, val); - /* introduce tx clock delay */ - phy_write(dev, 0x1d, 0x5); - val = phy_read(dev, 0x1e); - val |= 0x0100; - phy_write(dev, 0x1e, val); - return 0; }
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel