[PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-05-11 04:31:01
Also in:
lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts@@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 { reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <1000>; + qca,smarteee-tw-us-1g = <24>; + qca,clk-out-frequency = <125000000>; }; }; };
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel