[PATCH v2 2/7] net: phy: micrel: KSZ8081 & KSZ9031: add loopback support
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-04-15 13:07:56
Also in:
lkml, netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
PHY loopback is needed for the ethernet controller self test support. This PHY was tested with the generic net sefltest in combination with FEC ethernet controller and SJA1105 switch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/phy/micrel.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..26066b1e02e5 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c@@ -1311,6 +1311,7 @@ static struct phy_driver ksphy_driver[] = { .get_stats = kszphy_get_stats, .suspend = kszphy_suspend, .resume = kszphy_resume, + .set_loopback = genphy_loopback, }, { .phy_id = PHY_ID_KSZ8061, .name = "Micrel KSZ8061",
@@ -1356,6 +1357,7 @@ static struct phy_driver ksphy_driver[] = { .get_stats = kszphy_get_stats, .suspend = genphy_suspend, .resume = kszphy_resume, + .set_loopback = genphy_loopback, }, { .phy_id = PHY_ID_LAN8814, .phy_id_mask = MICREL_PHY_ID_MASK,
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel