[PATCH v2 1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
Date: 2021-04-13 14:33:07
Also in:
linux-devicetree, linux-phy, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch adds vbus-supply optional property to phy sub-nodes using connector node. A regulator for USB VBUS may be needed for host mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- Changes in v2: - add connector vbus-supply property as suggested by Rob --- .../devicetree/bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml@@ -74,6 +74,13 @@ patternProperties: "#phy-cells": enum: [ 0x0, 0x1 ] + connector: + type: object + allOf: + - $ref: ../connector/usb-connector.yaml + properties: + vbus-supply: true + allOf: - if: properties:
@@ -130,6 +137,10 @@ examples: reg = <0>; phy-supply = <&vdd_usb>; #phy-cells = <0>; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; }; usbphyc_port1: usb-phy@1 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel