[PATCH 4/4] pwm: Add support for aspeed pwm controller
flat view
STALE2020d
From: Billy Tsai <billy_tsai@aspeedtech.com>
Date: 2021-04-12 10:25:04
Also in:
linux-aspeed, linux-devicetree, linux-pwm, lkml
Subsystem:
pwm subsystem, the rest · Maintainers:
Uwe Kleine-König, Linus Torvalds
Add support for the pwm controller which can be found at aspeed ast2600 soc. This driver is part function of multi-funciton of device "pwm-tach controller". Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/pwm/Kconfig | 6 ++++++ drivers/pwm/Makefile | 1 + 2 files changed, 7 insertions(+)
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 63be5362fd3a..947ed642debe 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig@@ -42,6 +42,12 @@ config PWM_DEBUG It is expected to introduce some runtime overhead and diagnostic output to the kernel log, so only enable while working on a driver. +config PWM_ASPEED_G6 + tristate "ASPEEDG6 PWM support" + help + This driver provides support for ASPEED G6 PWM controllers. + + config PWM_AB8500 tristate "AB8500 PWM support" depends on AB8500_CORE && ARCH_U8500
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index cbdcd55d69ee..4a74c68547bf 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_SYSFS) += sysfs.o +obj-$(CONFIG_PWM_ASPEED_G6) += pwm-aspeed-g6.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel