[PATCH v2 02/24] ARM: at91: pm: move the setup of soc_pm.bu->suspended
From: Claudiu Beznea <hidden>
Date: 2021-04-09 11:14:47
Also in:
linux-devicetree, lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
Move the setup of soc_pm.bu->suspended in platform_suspend::begin function so that the PMC code in charge with clocks suspend/resume to differentiate b/w standard PM mode and backup mode. Signed-off-by: Claudiu Beznea <redacted> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm/mach-at91/pm.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e13ceef7ac9a..3742a1fb76db 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c@@ -214,6 +214,8 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) */ static int at91_pm_begin(suspend_state_t state) { + int ret; + switch (state) { case PM_SUSPEND_MEM: soc_pm.data.mode = soc_pm.data.suspend_mode;
@@ -227,7 +229,16 @@ static int at91_pm_begin(suspend_state_t state) soc_pm.data.mode = -1; } - return at91_pm_config_ws(soc_pm.data.mode, true); + ret = at91_pm_config_ws(soc_pm.data.mode, true); + if (ret) + return ret; + + if (soc_pm.data.mode == AT91_PM_BACKUP) + soc_pm.bu->suspended = 1; + else if (soc_pm.bu) + soc_pm.bu->suspended = 0; + + return 0; } /*
@@ -296,8 +307,6 @@ static int at91_suspend_finish(unsigned long val) static void at91_pm_suspend(suspend_state_t state) { if (soc_pm.data.mode == AT91_PM_BACKUP) { - soc_pm.bu->suspended = 1; - cpu_suspend(0, at91_suspend_finish); /* The SRAM is lost between suspend cycles */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel