Hi!
Dne torek, 02. marec 2021 ob 10:19:25 CET je Maxime Ripard napisal(a):
Hi,
On Sun, Feb 28, 2021 at 05:16:56PM +0100, Pieter Beers wrote:
quoted
Add HDMI out, including the display engine, to the BananaPi
M2 Zero.
Signed-off-by: Pieter Beers <redacted>
---
.../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/
arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
quoted
index e76d56a3df9c..d339a26662cb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -26,6 +26,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
I didn't noticed earlier, but BananaPi M2 Zero has mini HDMI, so type should
be set to "c" here.
Best regards,
Jernej
quoted
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint =
<&hdmi_out_con>;
quoted
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -107,6 +118,20 @@
};
};
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
These nodes should be ordered by alphabetical order
Thanks!
Maxime
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel